semiconductor, inc. ei 16lc05 thru ei16lc15 low capacitance, bidirectional, eight line monolithic tvs diode network _____________________________________________________________________________________ 4703 s. lakeshore dr., suite 2, tempe, az, 85282 ph: (602) 730-1000 fax: (602) 838-4740 web page: http://www.epicsemi.com features: 500 watts peak pulse power (tp = 8 x 20 s) esd and transient protection for data, signal, and vcc bus to iec 1000-4-2, iec 1000-4-4, iec 1000-4-5 protects up to 8 bi-directional lines standoff voltages from 5 to 15 v low capacitance for high speed interfaces low clamping voltage esd protection >8kv (contact) description the ei16lc series of monolithic transient voltage suppressors are designed for applications where voltage transients, caused by electrostatic discharge (esd) and other induced voltage surges, can permanently damage voltage sensitive components. these tvs diodes are characterized by their high surge capability, extremely fast response time and low on-resistance. the ei16lc series consists of bi-directional diode arrays with low input capacitances and is specifically designed to protect multiple or single data lines with each channel being electrically independent for multiple i/o port protection. these monolithic diode array networks can be used to protect combinations of 8 unidirectional or bi-directional lines. they provide esd and surge protection for sensitive power and i/o ports. applications: esd & surge protection for power lines & i/o ports ttl and mos bus lines rs-232, rs-422 and rs-485 data lines high speed logic high speed data & video transmission mechanical characteristics: available in 16 lead soic and pdip solder temperature : 265c for 10 seconds schematic: 1 2 3 4 5 6 7 89 10 11 12 13 14 15 16 maximum ratings rating symbol value unit peak pulse power (tp = 8 x 20 s) ppk 500 watts operating temperature tj -55 to +150 c
semiconductor, inc. ei 16lc05 thru ei16lc15 low capacitance, bidirectional, eight line monolithic tvs diode network _____________________________________________________________________________________ 4703 s. lakeshore dr., suite 2, tempe, az, 85282 ph: (602) 730-1000 fax: (602) 838-4740 web page: http://www.epicsemi.com storage temperature tstg -55 to +150 c electrical characteristics @ 25c reverse stand-off voltage min vbr @ 1ma max clamping voltage @ipp=1a max clamping voltage @ipp = 10a leakage current @ v rwm max. cap. @0v, 1mhz v rwm bv(min) vc vc i r cj volts volts volts volts a pf EI16LC05c 5 6 9.8 12.5 400 15 ei16lc08c 8 8.5 13.4 16.6 10 15 ei16lc12c 12 13.3 19.0 23.5 2 15 ei16lc15c 15 16.7 25.5 29.5 2 15 note : clamping voltage values are based upon an industry standard 8 x 20s peak pulse current (ipp) waveform.
|
